DescriptionSiteCostumerYear
-Chemical Industry
Ansys finite elements dynamic analysis of a melter reactor, including the internal piping, subject to the mixer periodic loads.
ItalySAMEC2015
-Mariner Topside Offshore Project
Construction design in accordance with EN 13445 and PED, in addition to Statoil requirements, of an Active Carbon Filter made in Titanium grade 2.
North See, UKWPI2014 - 2015
-Mariner Topside Offshore Project
Construction design in accordance with EN 13445 and Statoil requirements of three Dosing Tanks made in Titanium grade 2.
North See, UKWPI2014
-Sanitary Industry
Design in accordance with ASME VIII-1 and PED of the pressure boundary parts of the ABS-H3 small steam sterilizer manufactured by die forming process.  The design activity includes also finite element models of the rear head, the front cover and the outer door in order to assess the fatigue behaviour.
ItalyAbsolute-Up2014 - 2015
-Boiler Evaporator
State of stress calculation and verification at the the nozzle attachments to teh pressure equipment vaporizer.
RussiaRuths2014
-Sanitary Industry
Finite element analysis of the cast solution for the outer door of a small steam sterilizer and design in accordance with ASME VIII-1 and PED of the pressure boundary parts.
ItalyMeteor / Absolute-Up2014
-Technical Expertise
Preparation of manufacturing quotations for pressure vessels made in Titanium or in Duplex stainless steel.
ItalyWPI2014
-Food Industry
Construction design and certification in accordance with PED of a 1400 L tank in category IV, contining food fluid with gaseous nitrogen/carbon dioxide.
ItalyFrambati2014
-Food Industry
Construction design and certification in accordance with PED of a 800 L tank in category IV, contining food fluid with gaseous nitrogen/carbon dioxide.
ItalyFrambati2014
-Food industry
Construction design and certificatione in accordance with PED of a deaerator in category IV.
ItalyFrambati2013
-Food industry
Construction design and certificatione in accordance with PED of a product tank in category III.
ItalyFrambati2013
-Sanitary industry
Construction design in accordance with the ASME BPVC VIII-1 and PED of a small sterilizer.
ItalyAbsolute-Up2013
-Mining industry
Construction design in accordance with the ASME BPVC VIII-1 of a tank made in titanium.
FinlandWPI2013
-Petrochemical industry
Construction design in accordance with ASME B31.8 of ten pig traps (four horizontal receivers and six vertical launchers) for a petrochemical platform on Caspian Sea (Filanovski Field).
RussiaBellelli Engineering2012 - 2013
-Food industry
Construction design and certificatione in accordance with PED of a 5.000 L product storage tank in category IV.
ItalyFrambati2012
-Fod industry
Construction design and certificatione in accordance with PED of a 1.000 L product storage tank in category IV.
ItalyFrambati2012
-Food industry
Construction design and certificatione in accordance with PED of a 200 L product storage tank in category IV
ItalyFrambati2012
-Food industry
Construction design and certification in accordance with the ASME BPVC VIII-1 of a heat exchanger tube-in-tube.
ItalyFrambati2012
-Food industry
Construction design and certification in accordance with PED of a 100 L aseptic storage tank in category III.
ItalyFrambati2012
-Technological plants
Construction design and certification in accordance with PED of a stationary tank for Aquamix unit in category IV.
ItalyFrambati2012
-Technological plants
Construction design and certification in accordance with PED of two, one high and one low pressure, gaseous air containment vessels in category IV.
ItalyFrambati2012
-Acque del Chiampo Water Purification Plant, Arzignano, Vicenza
Verification of the pressure parts of the heat recovery gas-air heat exchanger.
Arzignano,
Italy
Demont2012
-Food industry
Construction design and certification in accordance with PED of a 8.000 L product storage tank 8.000 in category IV.
ItalyFrambati2012
-Pharmaceutics industry
Construction design and certification in accordance with PED of two 75 L aseptic tanks in category II.
ItalyFrambati2011
-Technological plants
Construction design and certification in accordance with PED of a a mixing tank pressurized steam jacket in category II.
ItalyFrambati2011
-Food industry
Construction design and certification in accordance with PED of two 700 L stationary tanks in category IV, serving the filling devices.
ItalyFrambati2011
-Food industry
Construction design and certification in accordance with PED of a 50 L stationary tank in category I.
ItalyFrambati2011
-Food industry
Construction design in accordance with PED of a 670 mm diameter colleting tank in category II.
ItalyFrambati2011
-Food industry
Construction design and certification in accordance with PED of a 5000 L wheeled tank in category IV.
ItalyFrambati2011
-Food industry
Construction design and certification in accordance with PED of a 100 L stationary tank in category II, serving the filling devices.
ItalyFrambati2011
-Trecate Sarpom Plant
PED rerating of R-4501 Reactor (No. 1538).
Trecate, ItalyGesco2008
-Prociner di Onyx-Soval Prociner Waste Treatment Center
Design and structural verification of the gas duct and relevant steel supporting structures connected to the post-combustion unit.
FranceSirtis2006
-Val d’Agri Oil Center, Sulphur Recovery Plant
Design, structural verification and elaboration of the execution drawings of the steel structure supporting the Hot Emergency Discharge V580-FK-801 and the relevant foundations.
Val d’Agri, ItalyCormin2000 - 2001
-Ponti sul Mincio Thermal Power Plant
Group 1 Boiler reburning and NOx reduction: survey of the existing structures and ducts, analysis of the new ducts lay-out, construction drawings of the new ducts and related supporting structures, design of the ducts and related reinforcing elements, design of the supporting structures.
Ponti sul Mincio, ItalyAnsaldo Energia1997 - 1998
-Rades and Liberty Plants, Tunisia
Construction design and stress analysis of the API atmospheric tanks.
TunisiaAnsaldo Energia1996 – 1998
-ILVA Taranto Heat Recovery Steam Generator
Pressure part design for ISPESL certification.
Taranto, ItalyAnsaldo Energia1995 - 1996
-ACEA Rome Heat Recovery Steam Generator
Pressure part design for ISPESL certification.
Rome, ItalyAnsaldo Energia1995 - 1996
-Bemberg Plant, Novara
Boiler life extension calculations.
Novara, ItalyAnsaldo Energia1995 - 1996
-Termini Imerese Plant, Palermo
Boiler life extension calculations.
Palermo, ItalyAnsaldo Energia1995 - 1996
-Italian Center for Aerospace Research (CIRA)
Development of the refrigeration system of the aerospace ship mock-up in the plasma chamber of the simulation plant.
Capua, ItalyAnsaldo Industria1996
-Ammonia-Urea Qafco III Plant, Qatar
Code verification and finite element analyses of some equipment.
Qafco, QatarBelleli1996
-Gela Plant
Coke Drum supporting skirt fatigue verification.
Gela, ItalyBelleli1996
-Trieste Municipality Solid Waste Treatment Plant
ISPESL certification of Flucorrex heat exchangers.
Trieste, ItalyTTR1996
-Busalla Oil Treatment Plant
Structural design of the oil catalytic hydro-treatment plant.
Busalla, ItalyTecnimont1996
-HALDIA Plant
Sizing calculations for 14 columns.
IndiaTecnimont1996
-Brazil Polypropylene Plant
Equipment structural design.
BrazilTecnimont1996
-Porto Tolle Power Plant
Design for revamping gas and air ducts system and boiler steel structures.
Porto Tolle, ItalyABB – CE1995
-Mirfa Desalination Plant
Desalinators structural design in accordance with ASME VIII-1 and supporting the qualification and aprroval process by the customer.
Arab EmiratesAnsaldo Energia1994 - 1995
-Kellog’s Plant
Finite element analysis of the Gas-Gas Exchanger nozzles, tubesheets and heads.
United StatesBelleli1994
-VEBA-OEL H2-N2-S2 Reactor
Reactor construction design according to AD-Merkblatt and finite elements analysis of the critical parts.
GermanyBelleli1993
-Fluor Daniel Plant
Reactor HTR construction design in accordance with the ASME BPVC.
United StatesBelleli1993
-Petrokemya Olefins Plant Al-Jubail, Saudi Arabia
Wind dynamic response of the Distillation Column BC 0955.
Saudi ArabiBelleli1992
-SAFCO Ammoniaca/Urea Project, Saudi Arabia
Assessment of the geometric longitudinal and circumferential irregularities of tower 1-C-302.
Saudi ArabiaBelleli1992
-MTBE Project, AL-Jubail, Saudi Arabia
Dynamic analysis of methanol recovery column 230-T-207.
Saudi ArabiaBelleli1992
-Superphénix 1 Nuclear Power Plant
Dalle thermo-mechanical analysis.
FranceAnsaldo Nucleare1992
-SBWR Plant
Evaluation, using the fracture mechanics approach, of the pressure vessel heat-up and cool-down pressure / temperature limit curves.
ItalyAnsaldo Nucleare1992
-Superphénix 1 Nuclear Power Plant
Mechanical design of the tank MDC002BA and casings MDC001BA, MDC201BA, SGR301-302-306-307-308 BA.
FranceAnsaldo Nucleare1991 - 1992
-Superphénix 1 Nuclear Power Plant
Mechanical design of the hydraulic valves MDC 001 ZH and MDC 002 ZH.
FranceAnsaldo Nucleare1990 – 1991
-Superphènix-1 Nuclear Power Plant
Being manager of the Ansaldo nuclear component design area, development of the design of the new barillet.
FranceNovatome1986 - 1989
-Trino Vercellese Enrico Fermi Nuclear Power Plant
Pressurized Thermal Shocks (PTS) integrity analysis of the presure vessel.
ItalyEnel1982